eStore
1601 LCD Display
1602 LCD Display
3-AXIS ACCELEROMETER
ParryTech “MEMSIC ACCELEROMETER” is a small form factor, integrated digital output 3-axis accelerometer with a feature set optimized for cell phones and consumer product motion sensing. Applications include user interface control, gaming motion input, electronic compass tilt compensation for cell phones, game controllers, remote controls and portable media products. Low power consumption and small size are inherent in the monolithic fabrication approach, where the MEMS accelerometer is integrated in a single chip with the electronics integrated circuit. In the MC3416 the internal sample rate can be set from 128 to 1024 samples / second.
4G LTE GSM Modem
Product Description
4G LTE GSM Modem PCB is based on A7672 4G LTE module supporting GSM, LTE FDD, LTE-TDD communication at LTE-CAT1 speed. AT Command interface is possible either using the UART pins or using the USB interface. Onboard UART level translator can support any of Microcontroller I/O levels from 3.3V to 5.0V. Two digital I/Os and one ADC input are available for remote monitoring and control. By interfacing external I/Os from microcontroller, one can Power ON, RESET the module and also can Turn ON / Turn OFF the power for modem PCB.Features
- 4G/3G/2G communication coverage. Supports GSM, LTE-TDD and LTE-FDD at CAT1 speed
- UART communication or USB interface for AT commands
- Level translated I/O’s available for controlling LTE module ON/OFF, Reset etc.,
- Power input over current protection, ESD protection for antenna and other external interface signals
- Operating voltage of 5V±5%; Operating temperature: -40°C to +85°C
Essential Accessories
(To be order separately)- GSM Magnet Mount Antenna - 1No
- RF Cable Assembly - 1No
- USB Cable 2.0 - 1No
4G LTE GSM Module Shield
4G LTE Mini PCIe
4G LTE Raspberry Pi HAT with sim7600
Product Description
4G LTE Raspberry pi HAT with SIM7600 is a multi-Band 4G/3G/2G communication and GNSS positioning module, LTE-CAT1 speed options. This product is designed to be directly compatible with Raspberry Pi board to enable 4G LTE data connectivity applications such as Internet of Things (IoT), using USB or UART interfaces. The USB interface enables the 4G LTE HAT Board to be connected to Windows/Linux/Android PCs or Industrial PCs if needed. UART interface enables easy interface with any other Microcontroller platform. The 4G LTE HAT Board has 32Kb EEPROM for device ID and driver storage.Features
- Worldwide 4G/3G/2G communication coverage. Supports VoLTE.
- GNSS supporting GPS, BeiDou, GLONASS, LBS positioning.
- Supports mail, TCP/ IP/ IPV4/ V6 Multi-PDP, MT PDP, and FTP/ FTPS/ HTTP /HTTPS /MQTT/ DNS.
- Firmware update via USB/FOTA.
- USB data interface, to connect with Raspberry Pi / Windows/Linux/Android PCs, or embedded host. UART interface with Raspberry Pi is also provided.
- Onboard I2C EEPROM to identify the HAT to the Raspberry Pi.
- Can be powered through Raspberry Pi USB or external +5V ± 5%.
- Raspberry Pi compatible 40pin GPIO header.
Essential Accessories
(To be order separately)- GSM Magnet Mount Antenna - 1No
- 4G LTE PCB Antenna - 1No
- RF Cable Assembly - 3No
- USB Cable 2.0 - 1No
- GPS Active Antenna with SMA - 1No
4G LTE shield With GNSS and BLE5.0
Product Description
4G LTE, GNSS, BLE5.0 Arduino Shield with A7672S is a multi-Band 4G/3G/2G communication and GNSS positioning module, LTE-CAT1 speed option. This product is designed to be directly compatible with Arduino UNO to enable 4G LTE data connectivity for applications such as Internet of Things (IoT), Tracking, using USB or UART interfaces. The USB interface enables the 4G LTE, GNSS, BLE5.0 Arduino Shield with A7672S Board to be connected to Windows/Linux/Android PCs or Industrial PCs as a standalone unit without Arduino if needed. UART interface enables easy interface of the shield PCB with any other Microcontroller platform other than Arduino as well.Features
- USB data interface to connect with Windows/Linux/Android PCs, or embedded host. UART interface with Arduino.
- BLE5.0 support with onboard PCB antenna.
- Worldwide 4G/3G/2G communication coverage. Supports VoLTE.
- GNSS supporting GPS, BeiDou, GLONASS, LBS positioning.
- Supports mail, TCP/ IP/ IPV4/ V6 Multi-PDP, MT PDP, and FTP/ FTPS/ HTTP /HTTPS /MQTT/ DNS.
- Firmware update via USB/FOTA.
- Can be powered through USB +5V ± 5%
Accessories
(To be order separately)- GSM Magnet Mount Antenna - 1No
- RF Cable Assembly - 2No
- USB Cable 2.0 - 1No
- GPS Active Antenna with SMA- 1No
C16QS 4G LTE Modem EVB
ParryTech “C16QS 4G LTE Modem EVB” is based on Cavli Wireless C16QS module supporting GSM, LTE-FDD, LTE-TDD communication at LTE-CAT1.bis speed. AT Command interface is possible either using the UART pins or using the USB 2.0 interface. Onboard UART level translator can support any of Microcontroller I/O levels from 3.3V to 5.0V. By interfacing external I/Os from microcontroller, one can Power ON, RESET the module and also can Turn ON / Turn OFF the power for the module.
Features
• Supports LTE-TDD and LTE-FDD at CAT1 speed. Two orderable parts available, one with Cavli Wireless Module supporting external SIM card and the other with built-in eSIM and Hubble subscription” data plan.
• UART interface and USB 2.0 interface available for AT commands.
• Supports various interfaces like SPI, I2C, I2S, ADC and GPIOs.
• Level translated I/O’s available for controlling LTE module ON/OFF, Reset etc.,
• Power input over current protection, ESD protection for antenna and other external interface signals.
• Operating voltage of 5V +/- 10%; Operating temperature: -40°C to +85°C.
Accessories
(To be order separately)- GSM Magnet Mount Antenna – 1No
- RF Cable Assembly – 2No
- USB Cable 2.0 – 1No
- GPS Active Antenna with SMA- 1No
GNSS Receiver BOB with IRNSS
Product Description
ParryTech “GNSS Receiver BOB with IRNSS”, is a satellite navigation receiver break out board, capable of supporting band L5-NavIC and L1-GAGAN/GPS signals to provide 3D navigation. SkyTraQ chipset/module combined with best board level RF design and matched &tested antenna, offers superior cold start sensitivity that allows to acquire, track, and get position fix autonomously even in difficult and weak signal environments.
Features
- L1 / L5 signal reception supporting NavIC, GAGAN/ GPS satellites. Uses SkyTraQ module PX1125S-01.
- Less than 33 second cold start TTFF.
- ~1 second hot start.
- ~2.5m CEP accuracy.
Essential Accessories
(To be order separately)- L1L5 Dual Band Active Antenna with SMA - 1No
