Home » e-Store

Showing all 16 results

4G / LTE USB Modem

3,528.00
This 4G/LTE and GNSS module is based on SIM7600EI chipset supporting CAT 1/4 speed. The multi-constellation GNSS receiver offers faster and accurate fixes. This customizable module comes with EEPROM and secure element as option. Linux support is available through QMI interface and as CDC device.

Read More…

4G/LTE CAT 1 Modem

2,126.00

This 4G/LTE modem is based on A7672S-LASC chipset supporting GSM, LTE-FDD, LTE-TDD communication at CAT 1 speed. The modem offers 3G/2G fallback support. The host interface is UART and also supports USB interface for AT commands. Free RTOS based Open CPU SDK is supported for custom application development.

Read More…

PDF Flyer

4G/LTE GNSS / BLE 5.0 Module

3,378.00

The Vehicle / Asset Tracking system reference solution is based on A7672S chipset comes in both Arduino Form factor and works as stand-alone solution as well. The product supports 4G/LTE in CAT 1 speed and supports GNSS, BLE 5.0 for the tracking and navigation solutions. The product has option to add the 6DoF, Barometer sensors and secure element for Secure connectivity.

Read More…

PDF Flyer

4G/LTE GNSS Mini PCIe Modem

9,903.00

4G/LTE modem with Integrated GNSS in Mini PCIe form factor offering Worldwide LTE, UMTS/GSPA+ and GSM/GPRS/EDGE coverage. This add-on module is ideal for high-computing applications, Industrial PC.

Read More…

PDF Flyer

4G/LTE Module (RPi HAT)

3,975.00

This 4G/LTE and GNSS module is based on SIM7600 chipset supporting CAT 1 speed. The multi-constellation GNSS receiver offers faster and accurate fixes. This customizable module comes with EEPROM and secure element as option. Linux support is available through QMI interface and as CDC device.

Read More…

PDF Flyer

Accelerometer sensor module

165.00

3-Axis Accelerometer sensor module with I2C output for variety of applications. Supports ±2, ±4, ±8, ±12, ±16g ranges. Low power consumption and small size (15x15mm) are inherent in the monolithic fabrication approach, where the MEMS accelerometer is integrated in a single chip with the electronics integrated circuit.

Read More…

PDF Flyer

BLE Digital Instrument Cluster

Parry Technology’s Bluetooth Low Energy 5.3 Digital Instrument Cluster Solution is a reference solution based on Single BLE SoC operating at maximum 125MHz for BLE connectivity, Graphic display, Navigation and other core Digital Instrument cluster functions.

This MCU has Single Corex-M55 compatible core that could run at 40MHz with lower supply voltage for low power consumption purpose, and at maximum clock 125MHz in high performance mode.

Read More…

C16QS 4G/LTE Modem EVB

2,360.00

Evaluation board Cavli Wireless LTE module C16QS. The board supports both onboard SIM and e-SIM variants and has external antenna provision for LTE and GPS.

Read More…

PDF Flyer

GNSS Receiver Evaluation Board with IRNSS support

1,302.00
arai tested
GNSS receiver module EVB is the evaluation board to validate Parry Technology’s IRNSS receiver module and Skytraq’s GNSS receiver module. The evaluation board offers on-board patch antenna for L1, L5 bands and external antenna provisions through SMA connector and u.FL connector. The board supports and performs well with Active and passive antennas.

Read More…

PDF Flyer

GNSS Receiver Module with IRNSS (NavIC) support

1,195.00
arai tested
GNSS receiver module with IRNSS (NavIC) support, acquires the precise geo-location from GPS (L1 band) and NavIC (L1 + L5 bands) satellite constellations for the tracking and navigation applications. The module contains phoenix positioning engine, featuring high sensitivity, low power consumption, fast TTFF (Time-to-First-Fix). The superior cold start sensitivity allows it to acquire, track and get position fix autonomously in difficult weak signal environment.

Read More…

PDF Flyer

Isolated RS485/422 Transceiver EVB

180.00

Evaluation board to validate IL4xxx-Series Transceivers (IL4822 / IL4622 / IL4685).

Read More…

PDF Flyer

RTL8762E Evaluation Board – Daughter Board

2,032.00

The RTL8762E daughter board supports RTL8762ESF-CG/ RTL8762ERF-CG/ RTL8762EJF-CG/ RTL8762EMF-CG / RTL8762EKF-CG/ RTL8762EKO-CG) variants and this can be plugged into RTL8762x Evaluation Board – Mother board

The EVB provides hardware environment for customer to validate the features of the SoC by developing their own application and test it along with the respective daughter board for RTL8762C/E.

Read More…

RTL8762x Evaluation Board – Mother Board

975.00

The RTL8762x Evaluation board (EVB) comes with a combination of mother board and daughter board.

RTL8762x shares the common mother board (PTBLEEVB-RT8762x_MB-V1) for the RTL8762 C/E series and the daughter boards are specific to the respective part numbers.

The EVB provides hardware environment for customer to validate the features of the SoC by developing their own application and test it along with the respective daughter board for RTL8762C/E.

Read More…

Single Channel Sub-GHz to Wi-Fi/BT Gateway

500.00

This Sub-GHz, Wi-Fi/BT gateway operating at 868MHz(EU) and 915MHz (US) ISM band frequency with LoRa® modulation. This being a simple one, for LoRa® communication with nodes, supports a single channel transmit/receive, half duplex communication to Wi-Fi/BLE devices. Optional “4G LTE GSM Module Shield” is available to extend this gateway with 4G LTE connectivity as well.

Read More…

PDF Flyer

Sub-GHz Transceiver Module

500.00

PTLR8MOD is based on Ultra-low power multi-modulation wireless microcontroller from ST Micro-electronics. The module with four-layer PCB is designed for good RF performance, allowing one to be benefited from the best RF sensitivity of the integrated LoRa® RF transceiver SX126x. The integrated 32MHz TCXO, 32KHz crystal along with the RF switch and RF passive components, enables quick software development and deployment.

Read More…

PDF Flyer

Sub-GHz Wireless IoT Module Evaluation Board

500.00

PTLRXEVB is a four-layer PCB designed for good RF performance and best RF sensitivity from LoRa® RF transceiver SX126x. EVB provides access to program or debug the microcontroller via Serial Debug wire interface pins and external STLINK debugger. USB connector allows easy powering of the target and with onboard USB to UART controller, provides UART for debug during development and flashing the STM32WL MCU on board using UART bootloader feature.

Read More…

PDF Flyer